3mm Bottom plate with integrated SMA antenna loop and dedicated FC stack holes, which means the FC is not part of the frame structure any more and changing the rear arms is a breeze.
Beefier 4mm Arms
Bigger top plate allowing to top mount your battery with double battery strap slots.
20mm High quality textured stand offs allowing to fit micro or mini cameras, Full size will fit as well but micro and mini are highly recommended
Frame weight including Hardware and Dimension Diagonally from motor shaft to motor shaft:
5" 212mm / 66gr.
6" 237mm / 72gr.
3mm Bottom Plate
2mm Top Plate
4mm 22XX sloted mounting pattern Arms x 4
M3x12 12.9 Oxide screw x 4
M3x16 12.9 Oxide screw x 4
M3x6 12.9 Oxide screw x 4
M3x5 12.9 Oxide screw x 4
Pyrodrone Soft mount rubber stand offs x 5
5mm plastic spacer x 4
M3x5 plastic screw x 4
20mm Textured anodized aluminum stand off x 4 ( we decided going with 20 so it fits any given camera, if you are using micro camera you can lower the top plate by another 5mm by using the 15mm stand offs)
3D printed FPV Camera mount